1x8 PLC Fiber Splitter Steel Tube No connector

1×8 Bare Fiber PLC Splitter, Singlemode, 250µm Fiber, No Connector
 

Planar lightwave circuit (PLC) splitter is a type of optical power management device that is fabricated using silica optical waveguide technology to distribute optical signals from Central Office (CO) to multiple premise locations.

Bare fiber splitter is a kind of ODN product suitable for PON networks that can be installed in the pigtail cassette, test instrument and WDM system, which minimizes the space occupation. It is relatively fragile on fiber protection and need a complete protection design on carrying box body and device.

Features

Application

Telcordia 1209 & 1221 Test Results

Name of the test	Condition	Duration
Temperature- Humidity aging	85°C and 85% RH	7 days
Vibration	10 - 55Hz, 1.52mm double amplitude, in three axes	1 hour
Component Impact	Test Impact of 500g (mass = 0.125kg), 1ms , half sine pulse	2 impacts
Temperature Cycling Test	-40 - 70°C, Ramp rate: 1°C /min, Dwell time > 15min	10 cycles
Temperature- Humidity cycling	-40 - 85°C , between 10°C and 23°C - 85% RH, at 85°C - 20%RH, between °C and 85°C - maintain a linear change in RH, below 10°C - uncontrolled RH	14 days
Water Immersion	43 ± 2°C , PH 5.5 ± 0.5	7 days
Fiber Side Pull test	0.23 kg load, 90° angle , 2 directions	5 seconds
Fiber Side Pull test	0.45 Kg load for Single Input Fiber, 1.5 Kg load for 8 Fiber Ribbon Outputs	5 seconds

Elementary component for fiber split

Bare splitter is the elementary component for fiber split, it need equipped with loose tube and connector, and its fragile fiber design need a complete design on carrying box body for fiber protection. 

Mechanical Drawing

Dimension: 40(L) × 4(W) × 4(H) mm