1x4 PLC Fiber Splitter, Steel Tube, Bare Fiber 250µm, No connector

1x4 PLC Fiber Splitter, Steel Tube, Bare Fiber 250µm, No connector

review
0
0
5
Your Price: Rs.400.00
Out of Stock
Part Number:RVG-PLC-104-ST-25-15
1×4 Bare Fiber PLC Splitter, Singlemode, 250μm Fiber, No Connector
 

Planar lightwave circuit (PLC) splitter is a type of optical power management device that is fabricated using silica optical waveguide technology to distribute optical signals from Central Office (CO) to multiple premise locations.

Bare fiber splitter is a kind of ODN product suitable for PON networks that can be installed in the pigtail cassette, test instrument and WDM system, which minimizes the space occupation. It is relatively fragile on fiber protection and need a complete protection design on carrying box body and device.

Features Application
1x4 bare splitter, unconnectorized Optical Signal Distribution
250μm ITU G.657A1 for fiber input/output Data Communications
Low insertion loss ≤ 7.2dB Lan and CATV System
Low polarization dependent loss (PDL) ≤ 0.2dB FTTX Deployment
Operating bandwidth: 1260 - 1650nm FTTH Network
Compact design, suitable for installation in optical equipments Passive Optical Networks (PON)
Wide Operating Temperature: -40 - 85°C, support industry standard applications Measuring System and Laser System
High reliability and stability, Telecordia GR-1221/1209 compliant DWDM and CWDM Systems
Telcordia 1209 & 1221 Test Results
Name of the test
Condition
Duration
Temperature- Humidity aging
85°C and 85% RH
7 days
Vibration
10 - 55Hz, 1.52mm double amplitude, in three axes
1 hour
Component Impact
Test Impact of 500g (mass ≤ 0.125kg), 1ms , half sine pulse
2 impacts
Temperature Cycling Test
-40 - 70°C, Ramp rate: 1°C /min, Dwell time > 15min
10 cycles
Temperature- Humidity cycling
-40 - 85°C , between 10°C and 23°C - 85% RH, at 85°C - 20%RH,
between °C and 85°C - maintain a linear change in RH,
below 10°C - uncontrolled RH
14 days
Water Immersion
43 ± 2°C , PH 5.5 ± 0.5
7 days
Fiber Side Pull test
0.23 kg load, 90° angle , 2 directions
5 seconds
Fiber Side Pull test
0.45 Kg load for Single Input Fiber, 1.5 Kg load for 8 Fiber Ribbon Outputs
5 seconds
Elementary component for fiber split
Bare splitter is the elementary component for fiber split, it need equipped with loose tube and connector, and its fragile fiber design need a complete design on carrying box body for fiber protection.


FS.COM
Mechanical Drawing
Dimension: 40(L) × 4(W) × 4(H) mm
FS.COM

Reward Points

400 points will be rewarded to you when you buy this item.

Recently Viewed Items